CE12 Cut End Hose System

Spec CE12

Suction & discharge hose for for transport of very abrasive materials such as plaster, ore, glass, wood chips, industrial waste, coal and metallic powder, etc.
Cut-end type hose for use with Aluminium clamps.
Hose can be cut on site to required length and fitted with clamps. No need special equipment

Temperature:	-35°C to +80°C
Cover:	Black Corrugated Chloroprene Rubber (CR), Oil, Abrasion & Weather Resistant
Reinforcement:	High Tenacity Polyester Tyre Cord. Single High Tensile Steel Wire Helix (BS EN 10324:2004). Use for Suction & Discharge
Tube:	Black NR (40Shore) - use for Wet Applications, Slurry and Fine Particles Black NR (60Shore) - use for Dry Applications, were required high resistant to sharp objects. Use for Coal, Chipstone, Gavel, etc. White or Tan NR (FDA Aproved) - use for Grain, Flour and other Food Grade Powders.
Available Working Pressure:	10Bar @ Safety Factor: 3:1
Available Sizes:	2"(51mm) - 6"(152mm) ► up to 61mtr long 8"(203mm) ► up to 30m long 10"(254mm) - 20"(508mm) ► up to 12mtr long
Fittings:	PN10 Clamps & Rubber Gaskets (Plain or Tappered) 2"(51mm) - 16"(406mm) ► Aluminium 18"(456mm) & 20"(508mm) ► Carbon Steel
Assembly:
Calmps & Gaskets: